48 - USE
91477A185/C
This function can be deactivated by selecting
and a different power level or by switching the
appliance off.
Pause function (on some models only)
This function allows you to pause the operation
of all the cooking zones.
To activate the Pause function:
1. With at least one cooking zone active, press
the
and
buttons at the same time.
2.
appears on the displays of all the
cooking zones.
To deactivate the Pause function:
1. Press the
and
buttons together. An
animation appears on the rear right zone
scroll bar.
2. Move your finger from left to right on the
scroll bar.
3. The Pause function has now been
deactivated and the previously set functions
are restored.
Recall Function (on some models only)
This is used to restore some functions that have
already been started after the appliance has
been switched off unintentionally.
In this case, carry out the following procedure
within 6 seconds:
1. Switch on the appliance.
• The LEDs above the
and
buttons
start to flash.
2. Press the
and
buttons at the same
time to restore the functions that were
previously active.
The Recall function only allows the following
functions to be restored:
1 Functions and power levels of the cooking
zones.
2 Timed
cooking.
3 Bridge
Function.
4 Rapid
heating.
5 Booster and Double Booster Functions.
6 Controls
lock.
Special functions
Warming Function
To activate the Warming function, first turn on the
hob, then:
1. Place a pan on a cooking zone.
2. Press the
button to activate the function.
The
symbol appears on the display of
the selected cooking zone and the
icon
will appear next to the scroll bar.
To turn off the Warming function, simply press
the
button of the relative zone again.
Grill Function
To activate the Grill function:
1. Place a griddle or a long pan on the right
zones.
2. Press the
button. The LED above it will
flash.
The
symbol appears on the front zone
display and the
symbol appears on the rear
zone display. The electronics will automatically
set the power level to 9 (preheating phase).
After 3 minutes of operation, the power will be
lowered to level 7 and the LED above the Grill
function button becomes steady.
Use the scroll bar to modify the power level at
any time.
Press the
button to deactivate the Grill
The Pause function can be maintained
for a maximum of 10 minutes, after
which the appliance switches off.
The cooking time limitation, the residual
heat indicators and the Controls Lock
function remain enabled during the
Pause function.
This function can only be used if at least
one cooking zone was active at the
time of the unintentional switch-off.
Any functions not listed will not be
restored.
This function allows you to keep cooked
food warm or to keep water on the boil.
This function is used to activate the
Bridge function automatically for the
right zones only. It is used when using a
griddle or cooking with long pans.
