Smeg CO68GMA, Руководство пользователя

Страница: 33 / 42

Instructions for the installer
77
13.INSTALLING THE APPLIANCE
13.1 Installing in kitchen units
Veneers, adhesives or plastic coatings on adjacent furniture should be
temperature-resistant (no less than 90°C). If they are not sufficiently
temperature-resistant, they may warp over time.
The appliance must be installed by a qualified technician and according to the
standards in force.
Depending on the type of installation, this appliance belongs to class 2,
subclass 1 (Fig. A - Fig. B) or class 1 (Fig. C).
It may be installed next to walls, one of which must be higher than the
appliance, at a minimum distance of 50 mm from the side of the appliance, as
shown in figures A and C relative to the installation classes.
Any wall units must be at a minimum distance of at least 750 mm above the
appliance. This distance can be reduced to 650 mm if a ventilation hood is
installed.
Built-in
appliance
(Class 2
subclass 1)
Built-in
appliance
(Class 2
subclass 1)
Free-standing
appliance
(Class 1)