Use
80
3.5 Programmer clock
Value decrease button
Clock button
Value increase button
Setting the time
On the first use, or after a power failure, the
digits
will be flashing on the
appliance’s display.
1. Hold down the clock button
for two
seconds. The dot between the hours and
the minutes flashes.
2. The time can be set via the value
increase
button and value
decrease
button. Keep the button
pressed in to increase or decrease
rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
4. The
symbol on the display indicates
that the appliance is ready to start
cooking.
The programmer clock only
controls the main oven and does
not control the auxiliary oven.
Ensure that the programmer clock
shows the cooking duration
symbol
, otherwise it will not
be possible to turn on the oven.
Press the
button to reset the
programmer clock.
If the time is not set, the oven will
not switch on.
To change the time, hold down the
value increase
button and
value decrease
button at the
same time for two seconds, then
set the time.