Use
23
EN
The flashing of a power level indicates that
it will be automatically limited to a new level
selected by the power control module.
Controls lock
1. With all cooking zones off,
simultaneously turn the two front right
and rear right cooking zone control
knobs anti-clockwise (position
A
).
2. Keep them turned until the
symbols
appear on the display.
3. Release the knobs.
In order to remove the control lock repeat
the same operations described previously.
Activating the hob power limitation
function
1. Switch off the cooker’s power supply
and wait 10 seconds before turning the
power back on.
2. Turn the front left and front right cooking
zone knobs anticlockwise at the same
time (to positions “
M-A
” and “
A
”
respectively), and keep them in this
position for 3 seconds. The rear left and
rear right cooking zone displays indicate
“
7.
” and “
4
”.
3. Release both knobs anticlockwise and
hold them in position. The rear left and
rear right cooking zone displays indicate
power levels “
4.”
and
“5
”.
4. Release both knobs anticlockwise and
hold them in position. The rear left and
rear right cooking zone displays indicate
power levels “
3.
” and “
0
”.
Priority is given to the last zone set.
The controls lock is a device that
protects the appliance from
accidental or inappropriate use.
If the knobs have been kept turned
to the
A
position for more than 30
seconds, the following fault
message
appears on the
display.
After a prolonged period of
interruption to the power supply,
the control lock will be
deactivated. If this is the case, turn
it back on as described above.
The induction hob is configured to
operate at
7.4 kW
. However, the
maximum power can be limited so
that it can work at
4.5 kW
or
3
kW.
The power level of the hob must be
set within 2 minutes of it being
connected to the mains power
supply.
