INSTALLATION - 53
91477A593/C
e
The nozzles not provided are available at Authorised Service Centres.
Positioning
Depending on the type of installation, this
appliance belongs to classes:
The appliance can be placed against walls that
are higher than the work surface, at a minimum
distance of X mm from the side of the appliance.
Any wall units installed above the appliance’s
worktop must be positioned at least Y mm from
it.
4 Natural Gas G2.350 - 13 mbar
AUX
SR
R
UR2
Rated heating capacity (kW)
1.0
1.8
2.9
4.0
Nozzle diameter (1/100 mm)
94
120
165
210
Pre-chamber (printed on nozzle)
(Y)
(Y)
(F3)
(H3)
Reduced flow rate (W)
400
500
800
1600
5 LPG G30/31 - 30/37 mbar
AUX
SR
R
UR2
Rated heating capacity (kW)
1.0
1.8
2.9
4.0
Nozzle diameter (1/100 mm)
50
65
85
102
Pre-chamber (printed on nozzle)
-
-
-
-
Reduced flow rate (W)
400
500
800
1600
Rated flow rate G30 (g/h)
73
131
211
291
Rated flow rate G31 (g/h)
71
129
207
286
6 LPG G30/31 - 37 mbar
AUX
SR
R
UR2
Rated heating capacity (kW)
1.0
1.8
2.9
4.0
Nozzle diameter (1/100 mm)
50
65
81
94
Pre-chamber (printed on nozzle)
-
-
-
-
Reduced flow rate (W)
450
550
800
1600
Rated flow rate G30 (g/h)
73
131
211
291
Rated flow rate G31 (g/h)
71
129
207
286
7 Town gas G110 – 8 mbar
AUX
SR
R
UR2
Rated heating capacity (kW)
1.0
1.8
2.8
3.8
Nozzle diameter (1/100 mm)
145
185
260
340
Pre-chamber (printed on nozzle)
/8
/2
/3
/13
Reduced flow rate (W)
400
500
800
1400
WARNING: In the case of conversion to City GAS G110 - 8 mbar (category 1a) do not
use the burners provided, but request the special G110 burners kit from our Technical
Assistance Service.
See General safety instructions.
Class 1
Free-standing
Class 2 - subclass 1
Built-in
X
150 mm
Y
750 mm
If a hood is installed above the
appliance, refer to the hood instructions
manual to make sure the correct
clearance is left.
