Use
47
EN
Screw on the handle provided so that you
can handle the rod with the food on it
readily.
Once you have prepared the rotisserie rod,
place it on the the rotisserie support.
Insert the rod into the hole
A
so that it
connects with the rotisserie motor.
Make sure that the pin is placed correctly
on the guide frame
B
.
3.4 Using the oven
Using the gas oven
Electronic spark ignition:
1. Open the oven door completely.
2. Press and turn the temperature knob anti-
clockwise between the values
and
. The electric spark ignition is
activated automatically.
3. After lighting, keep the knob pressed
down for a few seconds to allow the
thermocouple to heat up.
Remove the handle before closing
the door.
We recommend that you place the
tray on the first shelf to collect fats
more easily.
In the event of a power supply
failure the cooling fan does not
work. Do not switch on the oven
manually.
If the burner does not ignite after
15 seconds, stop attempting to
light it, leave the oven door open
and do not try to light it again for at
least 60 seconds.
In case of accidental extinguishing,
turn the knob to the off position and
do not try to light the burner again
for at least 60 seconds.
