background image

Instructions

43

EN

•  If the power supply cable is 

damaged, contact technical 
support immediately and they will 
replace it.

•  Do not open the storage 

compartment when the oven is on 
and still hot.

•  The items in the storage 

compartment may be very hot 
after the oven has been used.

•  Do not use aerosols in the vicinity 

of this appliance whilst it is in use.

•  This appliance 

must not be 

installed

 in a boat or caravan.

•  Do not use or store flammable 

materials in the storage 
compartment or near to the 
appliance.

Risk of damaging the appliance

•  Do not use abrasive or corrosive 

detergents (e.g. scouring 
powders, stain removers and 
metallic sponges) on glass parts.

•  Use wooden or plastic utensils.
•  Racks and trays should be 

inserted as far as they will go into 
the side guides. The mechanical 
safety locks that prevent them from 
being removed must face 
downwards and towards the 
back of the oven cavity.

•  Do not sit on the appliance.
•  Do not use steam jets to clean the 

appliance.

•  Do not obstruct ventilation 

openings and heat dispersal slots.

•  Never leave the appliance 

unattended during cooking 
operations where fats or oils 
could be released.

•  Never leave objects on the 

cooking surface.

•  Do not use the appliance to heat 

rooms for any reason.

Содержание C9GVXI9







































Отзывы: