Installation
69
EN
Adjusting the oven burner minimum
setting
The oven thermostat is equipped with a
screw for adjusting the minimum. When
changing the type of gas supply, the
minimum must be adjusted as follows:
1. Light the oven burner and keep it at
maximum for 10-15 minutes with the
door closed and without the shelf
installed. Then turn the knob to the
minimum temperature.
2. Slide off the knob and insert a straight
edge screwdriver to make the
adjustment.
3. If using liquid gas the adjustment screw
must be tightened clockwise to the very end.
Adjusting the minimum setting for LPG
Tighten the screw located at the side of the
tap rod clockwise all the way.
Lubricating the gas cocks
Over time the gas taps may become difficult
to turn and get blocked. Clean them
internally and replace the lubrication
grease.
Following adjustment to a gas
other than the one originally set in
the factory, replace the gas setting
label on the appliance with the
one corresponding to the new gas.
The label is inserted inside the
nozzle pack (where present).
Lubrication of the gas taps should
be performed by a specialised
technician.
