background image

Cleaning and maintenance

67

EN

3. To reassemble the door, put the hinges in 

the relevant slots in the oven, making sure 
that grooved sections 

A

 are resting 

completely in the slots. Lower the door 
and once it is in place remove the pins 
from the holes in the hinges.

4.4 Cleaning the door glazing

The door glazing should always be kept 
thoroughly clean. Use absorbent kitchen 
roll. In case of stubborn dirt, wash with a 
damp sponge and an ordinary detergent.

4.5 Removing the internal glass 

panes

The door glazing should always be kept 
thoroughly clean. Use absorbent kitchen 
roll. In case of stubborn dirt, wash with a 
damp sponge and an ordinary detergent.

4.6 Removing the internal glass 

panes

For easier cleaning the internal glazing 
panes of the door can be removed.
1. Remove the internal glass pane by 

pulling the rear part gently upwards, 
following the movement indicated by the 
arrows (

1

).

2. Then, pull the front part upwards (

2

). This 

way, the 4 pins attached to the glass 
detach from their housings in the oven 
door.

We recommend the use of 
cleaning products distributed by 
the manufacturer.

Содержание B60GMXI9











































Отзывы: