Smeg A11XPY-9, Руководство пользователя

Страница: 18 / 88

Use
20
3.5 Using the hob
All the appliance’s control and monitoring
devices are located on the front panel. The
burner controlled by each knob is shown
next to the dedicated knob. The appliance
is equipped with an electronic ignition
device. Simply press the knob and turn it
anti-clockwise to the maximum flame
symbol, until the burner ignites. If the burner
does not light in the first 15 seconds, turn the
knob to and wait 60 seconds before
trying again. After lighting, keep the knob
pressed in for a few seconds to allow the
thermocouple to heat up.
The burner could go out when the knob is
released: in this case, the thermocouple has
not heated up sufficiently. Wait a few
moments and repeat the operation. Keep
the knob pressed in longer.
Correct positioning of the flame-
spreader crowns and burner caps
Before lighting the hob burners on, make
sure that the flame-spreader crowns are
correctly positioned in their seats with their
dedicated burner caps. Make sure that the
holes
1 of the flame-spreader crowns are
aligned with the thermocouples 2 and
igniters 3 .
Practical tips for using the hob
For better burner efficiency and to minimise
gas consumption, use pans with lids and of
suitable size for the burner, so that the
flames do not reach up the sides of the pan.
Once the contents come to the boil, turn
down the flame far enough to ensure that
the liquid does not boil over.
In case of an accidental switching
off, a safety device will be tripped,
cutting off the gas supply, even if
the gas valve is open. Return the
knob to and wait at least
60 seconds before lighting it
again.
Cookware diameters:
• AUX: 12 - 14 cm.
• SR: 16 - 24 cm.
• R: 18 - 26 cm.
• DUAL: 18 - 28 cm.