Smeg A1-9, Руководство пользователя

Страница: 21 / 84

Use
109
EN
3.7 Using the oven
First use
On the first use, or after a power failure,
will be flashing on the appliance’s
display. In order to be able to start any
cooking operation, the current time must be
set (if the oven is being turned on for the first
time, it is also recommended you set the
required language).
Press the control knob to enter the settings
menu, see “3.12 Settings”.
Reactivating the display
If the Eco-Light mode is active (see “Eco-
Light” in the “Settings” chapter), the display
will switch off 2 minutes after the appliance
was last used.
To reactivate the display when it is off:
• press or turn one of the two knobs.
The appliance will emit a series of sounds
and the display will switch on after a few
seconds. The display shows the current time
screen when it is switched on again.
The appliance language is set to
"English" by default.
When first connecting or after the
power has been cut for a time it
will be necessary to wait a few
seconds before you can interact
with the appliance.
The lamp inside the oven cavity
switches on if you turn the return
knob to the right or left to
reactivate the display.
The main menu will appear on the
display if you reactivate the
display by pressing the control
knob.