BACnet Router Start-up Guide
Page 10 of 51
5
CONNECTING TO THE BACNET R OUTER
The FieldServer Toolbox Application can be used to discover and connect to the BACnet Router on a
local area network. To connect to the BACnet Router over the Internet using Toolbox, add the Internet
exposed IP Address of the Router by clicking on the button, or alternatively enter the Internet
exposed IP Address in a web browser directly.
5.1 Using the FieldServer Too lbox
•
Install the FS Toolbox application from the USB drive or download it from the
•
Use the FS Toolbox application to find the BACnet Router and launch the Web App (by clicking
the Connect button).
5.2 Using a Web Browser Directly
Open a Web Browser and input the BACnet Router
’s IP Address. The Default IP Address of the BACnet
Router is
192.168.2.101
, Subnet Mask is
255.255.255.0
. If the PC and the BACnet Router are on
different IP Networks, assign a Static IP Address to the PC on the 192.168.2.X network.
NOTE: Check
for supported browsers.
+
