SMC Networks PF3W7 Series, Руководство по эксплуатации

Страница: 57 / 93

-56-
No.PF
※※
-OMM0005-N
■
[F82] Input of line names
The name of a line can be input. (Up to 6 English characters and/or numbers)
The sub screen setting needs to be changed to show line names.
(Refer to [F10] Selection of display of sub screen on page
46 .)
<Operation>
Press the or button in function selection mode to display [F82] on the main screen.
The sub screen displays [LiNE] and the line name alternately.
Press the button.
Sub screen
The left most digit starts flashing. Select the required character from
spac
e→A→b→C
  
X→y→Z→0→1
  
8→9→_→ ― → ￣ →/→*→
space by pressing the and buttons.
Press the button (less than 1 second).
The next digit to the right will flash and can be edited.
(Follow the same procedure for the remaining digits)
After all 6 digits are input, press the
button for 1 second or longer.
Flashing stops.
Press the button to confirm. Return to the function selection mode.
[F82] Input of line names is completed.
<A dot "." can be displayed at the bottom left of each digit>
During setting, when the appropriate digit is flashing, press the and buttons simultaneously for 1
second or longer. A dot will be displayed.
To remove the dot, perform the same button operation.