Lochinvar ProtoNode Start-up Guide
Page 46 of 56
Appendix B.10 Change General Password
•
Type the IP Address of the ProtoCessor into the web browser or use the FieldServer Toolbox to
connect to the ProtoCessor, then login to the FieldServer.
•
Click on the Diagnostics tab at the top of the screen, then click on View in the navigation panel,
and then on Connections.
•
Click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
•
Click the Password tab.
•
Change the general login password for the FieldServer as needed.
NOTE: Passwords must be at least 10 characters long. An algorithm automatically checks the
password entered and notes the level of strength on the top right of the Password text
field.
Figure 45: FS-GUI General Password Update
