- 7 -
(3) Wiring / Connection / Grounding
Warning
Adjusting, mounting, inspection or changes to the wiring should never be done while power is
being supplied to the product.
Electrical shock, malfunction, and breakage can result.
Caution
Refer to the LATC4 series (controller) operation manual for detailed wiring.
(4) Installation of the controller setting software
Install the controller setting software in accordance with the installation procedure (PDF) in the
controller setting software CD-ROM.
1. 2 Controller settings
Card Motor model to be controlled and the controller operating conditions are set using a computer.
(1) Starting the controller setting software
To start the controller setting software, click the controller setting software icon (LATC-W1.exe) after
connecting the wires and supplying power to the controller.
Note) See the installation procedure (PDF) in the Controller Setting Software CD-ROM for
instructions on how to check the COM port number.
位 置
速 度
100
500
200
1000
50
200
1
2
3
テ スト
テ スト
テ スト
現在 位 置
120.3
現在 速 度
200
mm
mm/s
動作中
アラーム
モ ニ タ
設 定
位 置
速 度
100
500
200
1000
50
200
1
2
3
テ スト
テ スト
テ スト
現在 位 置
120.3
現在 速 度
200
mm
mm/s
動作中
アラーム
モ ニ タ
設 定
Card Motor
Actuator cable
Power supply cable
(to be prepared by the user)
Power supply plug
(attached to the controller) Controller
M4 screw
Cable with crimped terminal (grounding cable)
Shakeproof washer
(to be prepared by the user)
Counter plug
(attached to the controller)
Controller setting cable
(supplied with the LATC-W1)
LATC-W1.EXE
Enter the COM port number of the PC to which the
controller setting cable is connected.
Note)
(Once the conversion unit and virtual COM port drivers have been
installed for a certain COM port and communication established,
the same COM port number will automatically be found by the
software when the conversion unit is connected, and the "Please
select COM port No." dialog box may not be displayed again.
PC with WindowsXP or
Windows7
(to be prepared by the
user)
Power supply
24 VDC
for the controller
(to be prepared by the
user)