- 6 -
(2) Mounting of the Card Motor
【
Fixed side / moving side
】
Fix the rail to the mounting surface with screws before operating the table.
【
Mounting surface
】
Keep the flatness of the mounting surface of the table and rail
0.02mm or less.
Insufficient flatness of a work piece mounted to the table or
insufficient flatness of the mounting surface for the rail can cause
play in the guide and an increase in the sliding friction.
Mount the Card Motor on materials with good heat dissipation such as a metal plate.
If heat cannot dissipate, the product may over heat and it may damage the product.
【
Mounting screw specifications and tightening torques
】
Use stainless steel screws with appropriate length.
Tighten the screws to the recommended tightening torque.
The internal components may get damaged if the maximum screw-in depth is exceeded.
Tightening to a torque greater than the specified range may damage the Card Motor.
Insufficient tightening torque may cause the actuator or the work piece to come loose or position
displacement.
1) Mounting of the Card Motor from the bottom / tapped type.
Screw material
SUS
Screw dimensions
M3 x 0.5
Recommended tightening torque [Nm]
0.48 to 0.63
L1 (Maximum screw-in depth) [mm]
4.6
L2 (Plate thickness) [mm]
2.1
2) Mounting of the Card Motor from above / through hole type.
Screw material
SUS
Screw dimensions
M2.5 x 0.45
Recommended tightening torque [Nm]
0.27 to 0.36
L3 (Maximum screw-in depth) [mm]
2.5
L4 (Plate thickness) [mm]
2.1
3) Mounting of the work piece on top of the table.
Screw material
SUS
Screw dimensions
M3 x 0.5
Recommended tightening torque [Nm]
0.48 to 0.63
L5 (Maximum screw-in depth) [mm]
2.5
【
Locating of the Card Motor and work piece
】
Locating of the rail to the mounting surface and locating of the work piece onto the table using
the dowel pin holes on the rail and table.
Rail
Table
Dowel pin holes
for locating
the workpiece
Dowel pin holes
for locating
the rail
Rail side
Table side