- 26 -
3. 2 Controller
Refer to the LATC4 Series controller operation manual for details.
(1) How to Order
L A T C 4 - N
(2) Controller specifications
Item
Specifications
Control method
Step data entry type
Compatible actuator
Card Motor
®
LAT3 Series
Number of axis
Single axis
Power supply specification
(Note 1)
Power supply voltage: 24 VDC
±
10(%)
Current consumption: Rated 2 A (Peak 3 A)
Note 2)
Power consumption: 48 W (Maximum 72 W)
Note 2)
Control system
Closed loop
Operation pattern
Positioning operation, Pushing operation
Number of step data
15 points
Parallel input
6 inputs (Optically isolated)
Parallel output
4 outputs (Optically isolated, open collector output)
Position display output
Note 3)
A phase and B phase pulse signals, RESET signal (NPN open
collector output)
LED display
2 LED’s (Green and Red)
Cooling method
Natural cooling
Operating temperature range
5 to 40
o
C (No condensation)
Ambient humidity range
35% to 85% (No condensation)
Insulation resistance
50 M
Ω
(500 VDC) between the case and the FG terminal
Weight
Note 4)
130g (Screw mounting type), 150g (DIN rail mounting type)
Compatible Setting software for
PC
Note 5
)
LATC-W1
Card motor controller
Parallel I/O type
I/O cable length
NIL
Without cable
1
1m
3
3m
5
5m
Controller mounting method
NIL
Screw mounting type
D
DIN rail mounting type
N
NPN
P
PNP
Note 1) The DIN rail is not included. If the DIN rail is required, please order separately.
(Refer to the LAT3 series catalogue for details.)
Note 1) Do not use an inrush current limited type power supply for the controller.
Note 2) Rated current: Current consumption when continuous thrust is generated.
Peak current: Current consumption when maximum instantaneous thrust is generated.
Note 3) Specification for the connection of the separately sold multi-counter (CEU5).
Note 4) Cables are not included.
Note 5) The Controller Setting Software is not supplied with the controller. Refer to section “3.6 Controller setting kit” (P.
34) for how to order separately.