- 22 -
3. Specifications
3. 1 Card Motor
(1) Card Motor specifications
Model
LAT3-10 LAT3F-10 LAT3-20 LAT3F-20 LAT3-30 LAT3F-30
Stroke [mm]
10 20 30
Type
Moving magnet type linear motor
Maximum instantaneous
thrust [N]
Note 1) Note 2) Note 3)
5.2 6 5.5
Motor
Continuous thrust [N]
Note 1) Note 2) Note 3)
3 2.8
2.6
Type
Linear guide with circulating balls
Guide
Maximum load weight
[g]
Horizontal: 500, Vertical: 100
Horizontal: 500,
Vertical: 50
Type
Optical linear encoder (incremental)
Resolution [
μ
m]
30 1.25 30 1.25 30 1.25
Sensor
Origin position signal
None
Provided
None
Provided None Provided
Pushing speed [mm/s]
6
Pushing
operation
Set value of force
Note 1) Note 2) Note 3)
1 to 5
1 to 4.8
1 to 3.9
Positioning resolution
[
μ
m]
30 1.25 30 1.25 30 1.25
Positioning
operation
Positioning repeatability
[
μ
m]
Note 4) Note 5)
±
90
±
5
±
90
±
5
±
90
±
5
Measurement
Accuracy [
μ
m]
Note 4) Note 5)
±
100
±
10
±
100
±
10
±
100
±
10
Maximum speed [mm/s]
Note 6)
400
Operating temperature range [
o
C]
5 to 40 (No condensation)
Operating humidity range [%]
35 to 85 (No condensation)
Weight [g]
Note 7)
130
190
250
Table weight [g]
50
70
90
Note 1) Continuous thrust can be generated and maintained continuously. Instantaneous maximum thrust can be
generated only momentarily. Refer to “Fig. 4-1: Thrust force characteristics” (P.23) and to “Fig. 4-3: Allowable
thrust force setting values” (P.24) for details.
Note 2) When mounted on a base with good heat dissipating capacity at 20
o
C ambient temperature.
Note 3) The pushing force varies depending on the operating environment, pushing direction and table position. Refer to
Fig. 4-1 Thrust force characteristics” (P.23).
Note 4) When the temperature of the product is 20
o
C.
Note 5) The accuracy after mounting the Card Motor may vary depending on the mounting conditions, operating
conditions and environment, so please calibrate it with the equipment used in your application.
Note 6) The maximum speed varies depending on the operating conditions (load weight, total travel distance).
Note 7) The weight of the Card Motor itself. Controllers and cables are not included.