- 21 -
2. 2 System structure
Options
(Can be ordered separately or with the motor)
Accessories
(Supplied with the controller attached to it)
No.
Description
Part No.
No.
Description
Remarks
1 Controller LATC4-
∗∗∗
1
Power supply plug
For the controller power
supply
2 Actuator
cable LATH1-
∗
3 I/O
cable LATH2-
∗
2
Counter plug
For the multi-counter
Separately sold products
No.
Description
Part No.
Remarks
1 Multi-counter
CEU5
∗∗
-
∗
2 Counter
cable
LATH3-
∗
3
Controller setting kit
LATC-W1
Controller setting software
Controller setting cable
Caution
Refer to the LATC4 series controller operation manual for detailed wiring.
Refer to section “7. Common precautions for wiring and cables” (P.59) for instructions regarding wiring
and handling of cables.
Complete the “Controller setting cable” assembly by connecting the “USB cable” to the “Conversion
unit” attached at the end of the “Communication cable”.
Note 1) “Options” such as controller and cables can be added to the How to Order for the main
products (Card Motor and Card Motor controller). Refer to How to Order for details.
Note 2) “Separately sold products” cannot be added to the How to Order for the main products
(Card Motor and Card Motor controller). These should be ordered separately.
Note 3) Power supply, power supply cables, PLC, and PC should be prepared by the user.
Note 4) These items are used to set the parameters and step data and to perform test operations.
Note 5) These items are used to display the table position and to signal active pre-set positions to
external devices via digital outputs when measuring the length.