- 10 -
1. 3 Test operation using a computer
A test operation can be performed using a computer. The operating performance and the controller
settings can be tested and confirmed by operating the Card Motor under the actual operating conditions
using the Card Motor Controller Setting Software in “Test Mode” as follows.
A. Select the “Monitor/Test” tab and switch to “Test Mode”.
(1) Jogging at a set speed
The Card Motor can be jogged at a constant speed as follows.
(i) Click the [Servo Off] button to energize the motor.
(ii) Click the [Return to Origin] button to move the table to the Origin Position.
(iii) Enter the desired Jog [Speed].
(iv) The table can now be moved at the set speed in either direction by pressing either the [<-
(Connector Side)] or the [-> (Opposite Side)] button. The movement will stop when the button is
released.
If it is necessary to stop the operation, press [Servo On] (v) to de-energize the Card Motor.
Warning
Consider the operational behavior of the table when the power supply to the motor is turned off.
When the [Servo On] button is clicked, the Card Motor will be de-energized, the table will no longer
be fixed and can be moved by external forces. Ensure that the table movements cannot cause any
human injury or damage to the equipment.
(ii)
(iii)
(iv)
(i)
(v)
A