IDX-OM-W010
Air Dryer
12 Specification for Option R
12-3 Power supply connection procedure
12- 2
IDF Series
12-3 Power supply connection procedure
1) Take off the rear panel.
2) Insert the power cable prepared by the customer into the power code fixture and bring the power cable
near the terminal base through the base hole.
3) Connect the power cable to the terminal of the GFCI.
4) Connect the grounding cable.
- AC100V: Connect the ground line to M4 screw on the left side of the GFCI (with the name plate).
- AC200V: Connect it to the terminal block (ground connection thread: M3)
5) Mount the
rear panel.
Terminal connecting screw: M5
Connector width: 9.5mm or less
Applicable electrical wire: 1.25mm
2
or more
To the user’s machine
L ,N: Power supply
N
L
Ground fault display button (white)
Test button (gray)
GFCI