IDX-OM-M051
Air Dryer
2. Transportation and installation
2.2 Installation
2 - 6
IDF100F~150F-W
- The drain tube is at the left side of the product, but can be taken from the right side.
1. Remove the rear panel.
2. Take out the drain tube inward.
3. Cut the rubber grommet on the opposite side using a cutter.
4. Pass the drain tube through.
5. Replace the rear panel.
Caution
- When handling the rear panel, be sure to wear protective gloves to prevent injuries from its sharp edge.
2.2.6 Draining piping for condensed water
When the product is used in a environment with high humidity, condensation may be generated
internally. The condensed water can be drained from the right side of the base of the product. Let
condensate flow into a water outlet or install a drain pan, etc.
This draining piping is only for condensed water.
Rear panel
Drain tube
Front
Drain tube for condensed water
Base
Right side