SMC Networks HRS090-A...-20 Series, Оригинальное руководство пользователя

Страница: 63 / 192

HRX-OM- T002
Chapter 4 Starting the Product
HRS090 Series 4.5 Check items during startup
4-9
4.5 Check items during startup
Check the following items after starting the product.

Confirm that there is leakage from the piping.

Confirm that no circulating fluid is discharged from the drain port.

Confirm that the circulating fluid pressure is within the specification range.

Confirm that the fluid level shown by the fluid level gauge is within the
specification range.
4.6 Adjustment of Circulating Fluid flow rate
When the circulating fluid flow rate is smaller than the minimum required,
the product may fail to maintain the performance, making it impossible for
the compressor to operate.
Refer to
Fig. 3-20 Recommended piping circuit, and adjust the flow rate with the
manual valve to the required pressure or flow rate while monitoring the pressure
and/or flow rate.
[Tips]
Regarding the minimum operation flow rate, refer to
“9.1 Specifications”.
When any abnormality is found, press the [STOP] button to stop the
product operation,
and then turn OFF the breaker of the user’s power
supply.