SMC Networks HRS018-A, Руководство по эксплуатации

Страница: 77 / 162

HRX-OM-W058
Chapter 5 Display and setting of various functions
HRS-R Series 5.8 Signal for completion of preparation (TEMP READY)
5-19
5.8 Signal for completion of preparation (TEMP
READY)
5.8.1 Signal for completion of preparation (TEMP READY)
This function sets the band width for the circulating fluid set temperature
(upper/lower temperature range) in order to notify the customer by
communication that the circulating fluid temperature has reached the band
range (upper/lower temperature range).The default setting of this function is
“OFF”.
【
Tips
】
This function is available when contact input/output and serial communication
is used. Refer to the Communications Operation Manual for more details.
An example is shown below.
Circulating fluid set temperature
：
20
o
C
READY band width (upper/lower
temperature range)
：
±2
o
C
READY time
：
60 sec.
Preparation is completed 60 seconds after the circulating fluid temperature
reaches 18
o
C to 22
o
C.
Circulating set fluid 20
℃
READY TEMP 22
℃
READY TEMP 18
℃
READY band width
（
upper/lower temperature range
）
2
℃
READY band width
（
upper/lower temperature range
）
2
℃
Circulating set fluid
READY time
６０
sec
Completion
of preparation
READY time
lower than
６０
sec
Contact output
：
State generation output
Serial
：
ON output
Contact output
：
State not generation output
Serial
：
OFF output
Completion of preparation
（
TEMP READY
）