QuickServer Start-Up Guide
Page 37 of 45
Appendix B.8. Change User Management Settings
•
Click User Management in the navigation panel.
NOTE: If the passwords are lost, the unit can be reset to factory settings to reinstate the default
unique password on the label. If the default unique password is lost, then the unit must be
mailed back to the factory.
Appendix B.8.1. User Management
•
Check that the Users tab is selected.
User Types:
Admin
– Can modify and view any settings on the FieldServer.
Operator
– Can only make changes to the writable device points on the FieldServer.
Viewer
– Can only view settings/readings on the FieldServer.
Figure 28: FS-GUI User Management
