SMC Networks FieldServer FS-8700-60 Gardner Denver, Руководство пользователя

Страница: 10 / 13

Gardner Denver Driver Manual
Page 10 of 13
5.4 Map Descriptor Examples
5.4.1 Polling All Available Controller Data
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Gar_Cmd , Gar_Data , Scan_Interval
GD_MBA1 , DA_Service_Data , 0 , RDBC , Node_1 , Service_Data , All , 1.0s
GD_MBA2 , DA_Oper_Mode , 0 , RDBC , Node_1 , Operating_Mode , All , 1.0s
GD_MBA3 , DA_Oper_Data , 0 , RDBC , Node_1 , Operating_Data , All , 1.0s
5.4.2 Polling Specific Data Item s
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Gar_Cmd , Gar_Data , Scan_Interval
GD_MBA1 , DA_Hourmeter , 0 , RDBC , Node_1 , Service_Data , Hourmeter_total , 1.0s
GD_MBA2 , DA_Oper_Mode , 0 , RDBC , Node_1 , Operating_Mode , Oper_mode , 1.0s
GD_MBA3 , DA_Motor_Amps , 0 , RDBC , Node_1 , Operating_Data , Motor_current , 1.0s
5.4.3 Polling All Data and Isolating Specific Data Item s
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Gar_Cmd , Gar_data , Scan_Interval
GD_MBA1 , DA_Service_Data , 0 , RDBC , Node_1 , Service_Data , All , 1.0s
GD_MBA2 , DA_Oilage , 0 , Passive_Client , Node_1 , Service_Data , Oilage , -
GD_MBA3 , DA_Hourmeter , 0 , Passive_Client , Node_1 , Service_Data , Hourmeter_total , -
GD_MBA4 , DA_Oper_Mode , 0 , RDBC , Node_1 , Operating_Mode , All , 1.0s
GD_MBA5 , DA_Oper_State , 0 , Passive_Client , Node_1 , Operating_Mode , Oper_state , -
GD_MBA6 , DA_Oper_Data , 0 , RDBC , Node_1 , Operating_Data , All , 1.0s
GD_MBA7 , DA_Disch_Temp , 0 , Passive_Client , Node_1 , Operating_Data , Discharge_temp , -
The Gar_data field is set to “All”
indicating that all available data is polled.
The Gar_Cmd field is used to select
the data to poll.
The Gar_data field is set to “Motor_current”
indicating that only this data item will be stored.
The Gar_Cmd field is used
to select the data to poll.
.
Active Read Block Continuous Map Descriptor
function responsible for polling the Controller.
Active Read Block Continuous map descriptor
function is responsible for polling the Controller.
The Gar_Cmd field is used
to select the data to poll.
The specific data item, “Discharge_temp”
is isolated here by using the same
Gar_Cmd as the active map descriptor.
The Passive_Client Map Descriptor does not poll
but receives data from the active map descriptor
where the Gar_Cmd and Node_Name fields match.