ISP S
ETTINGS
2-5
ISP Settings
Please collect the following information from your ISP before setting up
the Barricade (for PPPoE, PPPoA or fixed IP users only):
•
For PPPoE and PPPoA users
•
An ISP account user name and password
•
ISP authentication type or script (if not PAP/CHAP)
•
For fixed IP users
•
IP address and subnet mask
•
IP address for your ISP’s Gateway Server and Domain Name
Server
Connect the System
The Barricade can be positioned at any convenient location in your office
or home. No special wiring or cooling requirements are needed. You
should, however, comply with the following guidelines:
•
Keep the Barricade away from any heating devices.
•
Do not place the Barricade in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the Barricade.
Connect the ADSL Line
Run standard telephone cable from the wall jack providing ADSL service
to the WAN port on your Barricade. When inserting an ADSL RJ-11 plug,
be sure the tab on the plug clicks into position to ensure that it is properly
seated. If you are using splitterless ADSL service, add low-pass filters
between the ADSL wall jack and your telephones. (These filters pass voice
Содержание Barricade SMC7404WBRA EU
Страница 9: ...COMPLIANCES vi ...
