![background image](http://html.mh-extra.com/html/smc-networks/2888w-m/2888w-m_owners-manual_1300139029.webp)
Hardware Description
1-7
The power injector module automatically adjusts to any AC
voltage between 100-240 volts at 50 or 60 Hz. No voltage range
settings are required.
Warning:
The power injector module is designed for indoor use only.
Never mount the power injector outside with the wireless
bridge unit.
Receive Signal Strength Indicator (RSSI) BNC
Connector
The RSSI connector provides an output voltage that is
proportional to the received radio signal strength. A DC voltmeter
can be connected this port to assist in aligning the antennas at
both ends of a wireless bridge link.
Grounding Point
Even though the wireless bridge includes its own built-in lightning
protection, it is important that the unit is properly connected to
ground. A grounding screw is provided for attaching a ground wire
to the unit.
Wall- and Pole-Mounting Bracket Kits
The wireless bridge includes bracket kits that can be used to
mount the bridge to a wall, pole, radio mast, or part of a tower
structure.
Содержание 2888W-M
