Chapter 2: LAN Installation
Procedure
A.Preparation
1. Ensure the power is OFF. Do not connect the Print Server
while power is on.
a) For those using the Wireless PCMCIA adapter SMC2632W V.2
please follow the installation instruction:
Insert your Wireless card SMC2632W V.2 into the PCMCIA slot on
the Print Server until it encounters some resistance. Push firmly
and it will click into position.
If you are using a different wireless adapter of a different
provider, please refer to Appendix B in this full installation
guide.
b) If you don't use a wireless connection, continue with the
described installation below for wired LAN connection.
B. Connect the Printer or Printers
• Connect the printer or plotter cable(s) to the appropriate
port(s) on the Print Server unit. Parallel port cables should be
less than 3 meters long.
C. Connect the Network Cable
• Connect a standard network cable from the LAN connector on
the Print Server to a 10BASE-T or 100BASE-TX hub or switch.
NOTE:
On the SMC2622W-P and SMC2622W-U, this will disable
the Wireless interface, because the default "Infrastructure
mode" wireless setting cannot be used with the LAN interface.
To use both the LAN and Wireless interfaces, the Wireless
mode must be set to "Ad-hoc". After configuration, the LAN
interface can be disconnected if not required.
English
8
!
!