• Choose "Calibrated Color/Grayscale" in the Print pop-up menu
in the Print Options dialog box. The printer will make
adjustments to match the colors.
• Check your monitor to make sure all settings (for example,
brightness) are adjusted correctly.
Problem No. 10 When I send a print job, I get a PostScript
Command error or no print out.
Solution No. 10 Check the communication protocols. The
computer, Print Server and printer must all be
configured to the same communication
protocol.(either Binary or ASCII).
To configure your system:
1. Choose which protocol you are going to use. You should check
your printer; it may not give you a choice.
2. Set your printer to the correct protocol.
3. Use the computer's Print submenu to configure your computer
to use the protocol you have chosen.
4. Configure the Print Server to use the same protocol as the
printer and computer.
Windows Printing Problems
Problem No. 1
When I tried to install the Printing software for
Peer-to-Peer printing, I received an error
message and the installation was aborted.
Solution No. 1
This may be caused by an existing installation
of the printer port software. Before attempting
another installation:
• Remove the existing installation
• Restart your PC
To remove an existing printer port installation:
1. Open Start - Settings - Control Panel - Add/Remove Programs
English
66