Chapter 6: Web Interface Setup
Overview
The Print Server models incorporate the HTTP server. This allows
you to connect to the Print Server and configure it using your
Web Browser. Most browsers should work, provided they support
tables and forms.
Preparation
Because it supports dynamic IP Address allocation using DHCP,
BOOTP, or RARP, the Print Server ships with an IP Address of
0.0.0.0. This is NOT a valid IP Address.
Therefore, you must do ONE of the following:
• Check your DHCP server (if you have one), and determine the
IP Address allocated to the Print Server.
• Use the Windows setup wizard, the supplied BiAdmin program,
or another utility to allocate a valid IP Address to the Print
Server.
• Add an entry to the arp table to associate the hardware
address of the Print Server with the desired IP address, as
follows:
arp -s IP_Address 00:c0:02:xx:xx:xx (Unix)
arp -s IP_Address 00-c0-02-xx-xx-xx
(Windows)
Where:
IP_Address is the IP Address you wish to assign to the Print
Server.
00:c0:02:xx:xx:xx is the hardware address of the Print Server.
Example (Unix):
arp -s 192.168.0.21 00:c0:02:12:34:56
37
English