Menu Options
Status Menu
Device Info
Same as Device button.
Display all the configuration and status information about the
selected Print Server. The data is presented in a scrolling,
read-only window.
Port
Same as Port Status buttons.
InitDevice Menu
Attach Remote
This is used to connect to a Print Server device on another
LAN segment. If your LAN does not have a Router, ignore this
option.
Connected Protocol
This option allows you to designate which LAN protocol will
be used for communication between the selected device and
this application. You should select ONE protocol only.
Find
Use this option to use the IPX/SPX protocol to locate a Print
Server on the LAN. Simply enter the Default Name of the Print
Server you wish to locate. The Default Server Name
is shown on a sticker on the base of the device.
Reset Device
This will cause the device to reboot. This should be done
after making any configuration changes, or if the device stops
responding after some problems.
Restore Factory
This will restore ALL device values to their factory
Default
defaults. To restore only the current screen, use the Set to
Default button on the screen.
Set IP Address
For TCP/IP networks only:
• If a Print Server does not appear on the main screen,
use this option to set a Device IP Address, Gateway IP
Address, and Network Mask to the Print Server.
• This should only be necessary if your LAN is using ONLY
the TCP/IP protocol. In other cases, BiAdmin will use
IPX/SPX to locate the Print Server even if it doesn't
have a valid IP Address.
• To locate the Print Server, enter the Default Name. The
Default Server Name is shown on a sticker on the base
of the device.
• Enter the required IP Address, Network Mask, and
Gateway IP Address.
• After saving the data to the device, refresh the listing.
The Print Server should then appear in the device list
on the main screen.
Upgrade
Upgrade the firmware in a Print Server. See Upgrade Icon
for details.
English
35