3. Follow the prompts to complete the installation. (Refer to the
Windows section of chapter "Troubleshooting" if there is a
problem with the installation.)
4. The Print Driver Setup will then run.
5. The LAN will be searched for Print Servers, and a screen like
the following will be displayed.
• If desired, change the Workgroup name and click Refresh.
• Select List all Print Servers to list all Print Servers, regardless
of Workgroup.
• The name of the attached printer will be displayed if possible.
If "No printer" is displayed, check that the printer is properly
connected and powered on.
If your Print Server is not listed:
• Select "List all Print Servers", and click the "Refresh" button.
• Check that both the Print Server and the printer are properly
connected, and powered on.
• Check that the Print Server has been configured, using the
Administrator installation option on the CD-ROM, and the
resulting Setup Wizard.
• If using TCP/IP, try installing the NetBEUI protocol. See the
earlier section "Checking your Network Protocols" for details.
English
21