13 - 91
13. POSITIONING MODE
13.9 Program setting method
This section provides the method for setting programs using set up software(MR Configurator2
TM
).
POINT
Positioning mode is supported by set up software(MR Configurator2
TM
) with
software Ver.1.52E or later.
(1) How to open the setting screen
Click "Positioning-data" on the menu bar, and click "Program" on the menu.
(2) Explanation of Program window
1) Reading the program
Click the "Read" button to read the program stored in the driver.
2) Writing the program
Click the "Write" button to write the program, whose setting has been changed, to the driver.
3) Verifying the programs
Click the "Verify" button to verify the program contents on the personal computer and the program
contents of the driver.
4) Selecting the program No.
Used to select the program No. to be edited.
5) Editing the program
Used to edit the program selected in 4). Click the "Edit" button to open the Program Edit window. Refer
to (3) in this section for the edit screen.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
(11)
