SMC Corporation HRS018-A 20 R Series, Руководство по эксплуатации

Страница: 96 / 162

HRX-OM-W058
Chapter 5 Display and setting of various functions
5.16 Alarm customize function HRS-R Series
5-38
Changing of circulating fluid discharge temperature rise Setting and checking
4.
Press the [SEL] key once.
The set screen of changing of circulating fluid discharge temperature rise is displayed on
the digital display.
5.
Select changing of circulating fluid discharge temperature rise from the table below with
[▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.16-4 List of set value
Set value Explanation
Initial value
(Default setting)
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
○
Operation is stopped when this alarm signal is
generated.
Detection temperature for circulating fluid discharge temperature rise Setting and checking
6.
Press the [SEL] key once.
The set screen of detection temperature for circulating fluid discharge temperature rise is
displayed on the digital display.
7.
Select detection temperature for circulating fluid discharge temperature rise from the
table below with
[▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.16-5 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of the circulating fluid discharge
temperature rise is OFF.
Centigrade
to
Sets detection temp for the circulating fluid
discharge temperature rise.
Temperature unit is Centigrade : Setting unit is
0.1
o
C
Temperature unit is Fahrenheit : Setting unit is
0.1
o
F
Fahrenheit
to
PV
SV
PV
SV