Smawave Technology SGL4010, Руководство пользователя

Страница: 30 / 54

Figure 5- 37
IP Filtering
Data is filtered by IP address. This page enables you to configure the IP address filtering rules.
Enabling IP Filtering
To enable IP Filtering, perform the following steps:
1. Choose
Firewall
>
IP Filtering
.
2. Set IP Filtering Enable .
3.
Click Submit . As shown in Figure 5-38.
Figure 5- 38
Disabling IP Filtering
To disable IP Filtering, perform the following steps:
1. Choose
Firewall > IP Filtering .
2. Set IP Filtering Disable .
3. Click Submit . As shown in Figure 5-39.
Figure 5- 39