SmartSight S1500e Series, Быстрое руководство по установке

Страница: 41 / 47

Quick Installation Guide Status LEDs
29
System LED on the S1504e and S1508e
The system status LED provides detailed information on the current
state of the transmitter, excluding video.
* At least one of them must be transferred to obtain the LED
condition.
Condition Indication
Steady red The unit is powering up.
Flashing red (1 sec.
intervals) The IP address of the unit is already assigned to another
unit in the network.
Flashing green (3 sec.
intervals) The firmware has started, but the unit is not connected to
the network.
Flashing green (1 sec.
intervals) The firmware has started, the unit is connected to the
network, but no audio/serial* data is transmitted.
Flashing green (0.2 sec.
intervals) The firmware has started, the unit is connected to the
network, and audio/serial* data is transmitted.
Flashing green-red
(1 sec. intervals) The unit is undergoing a firmware update.
Flashing red (0.1 sec.
intervals) The unit is being identified.