SmartSight S1500e Series, Быстрое руководство по установке

Страница: 35 / 47

Quick Installation Guide Installation
23
5
To disable I/O data transmission (for example, alarms), clear
Forward I/O .
6
To disable serial port data transmission (like PTZ commands),
clear Forward Serial Port Data .
7
To enable audio between the units, check Enable Audio , then
select the audio mode.
8
Click Connect .
You should now have video on the monitor connected to the receiver
unit.
Installation
Once your system is successfully configured, it is ready to be
installed in its final location. Remember that your unit is an indoor
product that cannot support an outdoor environment.
The number of video inputs varies depending on the unit in the
S1500e series. Each source requires a means to output the video.
Depending on the context, you require up to eight S1500e receivers
to output the video:
‹
Point-to-point analog extension—One receiver per video input
‹
nDVR—No receiver, since all output will be directed to the
computer screen