What’s in the box
*
Thank you for choosing Smartpay
STEP ONE:
Plug in
Getting Started Guide |
Smartpay PAX S80c
The
S80c
is a simple, secure and robust one-piece countertop terminal. It requires mains power and connects to the network via a phone line
or broadband connection. If you want a separate PIN pad for your customers you can add this on (S300).
You might find it easiest to have the base unit face down on the
counter to do these steps.
1. Put the round end of the power cable into the POWER socket on
the terminal.
2. If you’re using a broadband or fibre internet connection, plug your
ethernet cable into the LAN/ port.
3. If you are using a dial-up internet connection or dial-backup, plug
the phone cable into the LINE port.
4. Tuck the cables into the recessed cable tidy guides on the bottom
of the base unit.
1. Plug in the power supply to the electrical
power socket.
2. Turn on the power at the wall, then push and
briefly hold the button on the terminal. The
terminal will go through a start up sequence.
STEP TWO:
Switch on
Complete these simple steps to get your terminal
connected and ready to take payments.
STEP THREE:
Connect to the Paymark network
*If this is a replacement terminal you may need to use the cables from your existing terminal.
Your terminal arrived with a printed receipt still attached:
1. If the receipt is a short receipt with your business name on it, you are now all ready to go.
2. If not, you’ll need to call us before you can connect. Call Smartpay Technical Support
Team on
0800 476 278
. We will release the security key and perform your initial logon.
If you are integrating your terminal with your Point of Sale (POS)
or Electronic Cash Register (ECR), the idle screen will display the
Paymark EFTPOS screen (rather than the idle screen as shown
on the reverse of this guide).
Please refer to the Integration Set
Up Guide included with your terminal.
To download the full user guide visit
smartpay.co.nz/guides
this contains instructions on care for your terminal, loading
paper and full functionality details.
Now you’re all ready to take payments
Flip this card over
for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Terminal base
unit
Power supply
Ethernet and/or
phone cable
Return courier
label
Get help online at:
smartpay.co.nz/help
View the full user guide for your terminal at:
smartpay.co.nz/guides
Call our Technical Helpdesk on
0800 476 278
Contact your bank to enable/disable card types, electronic
vouchers (offline mode), contactless.
Contact Paymark to change your business name on your receipt.
Ports on the bottom of the terminal
Need help?
Integrated EFTPOS?
