29
Basic information about the device
Lid/housing opening
3D-sensor (not visible
from outside)
Swivel unit
Object holder/
Model holder
Figure 24: rotating-swivelling unit
Positioning unit
(inside the scanner):
The positioning unit contains the fixed base holder on which the object to be measured is fixed as well
as a rocker and a rotating unit powered by an electric motor.
Swivel axis:
The electrically driven swivel axis means that the object that is to be metered can be held in any turning
position relative to camera of the 3D sensor that is above the object slide.
The swivel unit makes it possible to swivel the whole set-up consisting of swivel unit and object slide
sideways and so capture side views of the object to be metered.
Interior lighting:
The interior lighting switches on automatically when the flap is opened. If the flap remains open for
longer than 5 minutes, the lighting will switch off automatically.
The interior lighting switches off automatically when the flap is closed.
11.2 Interior
