HGM501Genset Controller
HGM501 Genset Controller Version V1.0 2012-07-10 Page 4 of 15
1. OVERVIEW
HGM501 gen-set controller
is smart digital controller for control and protection
of single-engine gen-sets. It can carry out start/stop, data measurement, alarm
indication, shutdown protection and other functions. The controller is fitted with
LED indicators; it is reliable and easy to use.
HGM501 gen-set controller
contains the microprocessor allows precise
measurement of multiple parameters, which can be configured using controller
front panel. With simple wiring, compact structure and high reliability, HGM501 can
be widely used for data display and fault protection of a large number of diesel and
petrol generator sets.
2. PERFORMANCE AND CHARACTERISTICS
1. Two specialized LED displays: single phase voltage display and total active
power voltage display (calculated using single phase power, taking load as
balanced);
2. Multifunction LED display that can be switched between single phase
frequency, single phase current, battery voltage, total running time (max 999
hours), engine and generator temperature;
3. Under voltage, over voltage, under frequency, over frequency, over load, over
temperature protection, starting with flashing lights alarm and followed by
shutdown protection after alarm delay;
4. Low oil pressure digital input that immediately shuts down the generator in
case of low oil pressure;
5. Displayed parameters can be selected using touch-buttons;
6. Wide selection of temperature sensor types in settings;
7. All the parameters can be set via front panel for easy and convenient
operation;
8. Modular design, anti-flaming ABS plastic enclosure, compact structure,
convenient embedded installation.
