HAT600P Series ATS Controller User Manual Page 37 of 58
11
BLACK BOX RECORDS
In main menu interface, select "3. Black Box Records", press
to enter black box records interface.
Enter black box record interface, press
and
to check every record; press
to return
main menu interface.
1: 2019-09-24 09:25:30
2: 2019-09-28 10:07:18
3: 2019-10-06 10:13:56
4: 2019-10-23 11:45:20
Record time of the first data;
Record time of the second data;
Record time of the third data;
Record time of the four data;
Current selected event;
Close S2
Press
to check one data of the current records; Press
and
to check every data of
current records; Press
to return back to black box record interface.
Closing S2
19-09-28 10:07:18
+10s
Record event;
Record time (60 time points between 50s before record event and
10s after the event occur)
S1 power status;
S1 phase voltage;
S1 frequency;
S1 Available
U1 (LN) 220 221 219V
F1 50.00Hz
Press
and
key to check S1 Voltage, S2 Voltage, Current and Power of current time point.
Press
or
to exit the detailed data interface.
Closing S2
19-09-28 10:07:18 +10s
Record event;
Record time point;
S1 power status;
S1 phase voltage;
S1 frequency;
S1 Available
U1 (LN) 220 221 219V
F1 50.00Hz
Closing S2
19-09-28 10:07:18 +10s
Record event;
Record time point;
S2 power status;
S2 phase voltage;
S2 frequency;
S2 Available
U2 (LN) 220 221 219V
F2 50.00Hz
Closing S2
19-09-28 10:07:18 +10s
Record event;
Record time point;
Load current;
Load active power and power factor;
Amp 130 145 136A
TkW 86 PF 1.00
Black box records max. 5 items. Every event records the status information during the 60s before and
after the event occur. It records once per second. When record items is up to 5, new item will cover the
newest record. The first item is the newest. Users can check each record by Confirm key and check the
60 detailed data status in each item by Up and Down key.
Record type: Action events during the close and open transfer in Auto mode.
Table 21 Action Events are Ones at Below Time
No.
Action Event
Description
1
Opening
Opening in Auto mode;
2
Closing S1
S1 close in Auto mode;
3
Closing S2
S2 close in Auto mode;