Smartgen HAT553V, Руководство пользователя

Страница: 6 / 32

HAT553V ATS Controller User Manual Page 6 of 32
3 SPECIFICATION
Table 2 Technical Parameters
Items Contents
Operating Voltage
DC 9.0V~35.0V, continuous power supply; DC reverse connection
protection.
Power Consumption ≤3W (Standby mode: <2W)
AC Voltage Input
AC system HAT553V
3P4W (L-N) (50~277)V
3P3W (L-L) N/A
1P2W (L-N) (50~277)V
2P3W (L-N) (50~277)V
Rated Frequency 50/60Hz
Close Relay Capacity 10A AC250V Volts free output
Open Relay Capacity 10A AC250V
Volts free output
Auxiliary Relay Output 1
Capacity
10A AC250V Volts free output
Dynamo Start Relay 8A AC250V Volts free output
Digital Close Input
Active when A-CLOSE and IN COM short connected; Active when
B-CLOSE and IN COM short connected;
Forced to Open Input GND IN COM connected is active;
Digital Input 1 GND IN COM connected is active.
Communication
1. 1 RS422 isolated port, MODBUS Protocol;
2. D-form USB port;
Case Dimensions 139mmx120mmx50mm
Panel Cutout 130mmx111mm
Working Conditions Temperature: (-40~+70) °C; Humidity: (20~93)%RH
Storage Condition Temperature: (-45~+80)°C
Protection Level
IP65 Gasket: when there is waterproof gasket installed between
controller and the control panel;
Insulation Strength
Apply AC1.5kV voltage between high voltage terminal and low voltage
terminal and the leakage current is not more than 3mA within 1min.
Weight 0.44kg