- 10 -
2.Select the camera to operate, touch to view camera video directly
3.Photo taking, video recording, playback, full screen operation and image zooming
functions please refer to CVBS analog video operation part.
4. Channel name setting, Touch ‘info’ button under the ONVIF interface, touch ‘OSD’
button at the bottom of this page to pop up channel name, date time editing dialog, if you cannot
edit on this page, please go to corresponding camera client to operate, if there are no
corresponding client, please use the browser to login camera configuration page to edit the value.
2.5 RTSP player
RTSP player can play RTSP network video stream directly, touch RTSP icon, input camera IP
address or camera RTSP address to play the video stream directly.
2.6 Network tools
1. IP address scan function can not only scan out all IP addresses in LAN, but also identify
whether it is a camera IP, input Beginning and End IP, touch the ‘Scan IP’ icon to start, if there is a
camera icon behind the IP, it means it is a camera IP, if there is a camera icon and a question mark
behind the IP, it means it may be a camera IP, this function helps you to locate camera IP addresses
in LAN quickly, as shown in Figure 8
Figure 8
2. PING Tool: Touch
‘
Ping
’
icon to check current network conditions and PING value, you
can use PING to debug network conveniently, input
‘
Remote IP
’
,
‘
Send Num
’
and
‘
Send
size
’
(send size can use default value), touch
‘
Start
’
button to perform this operation, as shown
in Figure 9.
