28
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
Note:
The IPSCs and HPSCs series can be connected using a straight-through cable.
4.3. Universal Serial Bus (USB)
Strobe controllers providing a USB interface can be connected by an USB1.x/2.0 cable
providing Type-A to -B connectors.
Table 21: USB-B connector assignment
The USB connection is detected by the operating system as an USB-to-Serial converter and
provides a serial COM-port. Commands are sent and received similarly to the serial RS-232
interface.
Pin no.
Signal
1
V+
2
D-
3
D+
4
V-
2
1
3
4
