U100 Troubleshooting Diagram
3. Network issues
Network issues
Enable the network
card in the projector's
menu. Network and
VGA out in OSD menu
should be set to On.
Try assigning an IP to
the projector
Did the IP address
stay and projector is
connected?
Are you able to ping
the IP address from
a network PC?
Try DHCP
connection.
Did the IP address
stay and projector is
connected?
Does a computer get
an IP assigned when
plugged into the
network connection?
Consult your network
administrator. IP
assignment may be
restricted to MAC
addresses.
Try manual IP
connection.
Manual IP
DHCP
No
Issue resolved.
Yes
No
Consult your network
administrator as there is no
DHCP server on the port.
Not connected
Issue resolved.
No
Yes
Yes
No
Try a different IP
address. Another PC
is already assigned
to that IP address.
Did this resolve the
issue?
Issue resolved.
Yes
Yes
For further
assistance, contact
SMART Technical
Support.
Not connected
