SMART Sympodium IM-150, Руководство по установке, Страница: 9 / 63

Sympodium IM–150 Installation Guide 1
The Sympodium IM-150 Integration Module: A
Technical Overview
The Sympodium IM-150 interactive lectern integration module can be integrated with your
podium or desk and electronic peripherals to make an interactive presentation environment.
The module consists of two main components: the console and the X-Port 30 unit
When you integrate these components with your input sources (computers or video display
devices), you provide dynamic and interactive tools for presenters, speakers and teachers.
Moreover, the Sympodium IM-150 integration module provides a powerful interactive writing
surface that allows presenters to control and annotate over any computer application while
standing at the console, facing their audience.
Presenters can interact with up to three input sources, which can include their own laptop
computer or other video devices. A simple press of a button makes the image output of the
active source display on the interactive screen and up to two other connected video displays,
such as a projector and an external monitor. The IM-150 also sends the audio signal to any
connected room sound system.
This guide describes the functions of the console and the X-Port 30 unit, and how to integrate
these components with other systems. While some sections briefly discusses how to use the two
components, refer to the
Sympodium IM-150 User’s Guide for more detailed instructions on
using the IM-150.
The Console
The Sympodium IM-150 console includes the following:
•
interactive screen – a 15" (38.1 cm) liquid-crystal display (LCD) that uses an
electromagnetic digitizer
•
stylus – a tethered electromagnetic stylus that controls the LCD panel
•
pen tool buttons – for users to select stylus behavior with a simple button press
•
connectivity ports – serial, video and power ports are on the back of the console
Electromagnetic Stylus
Power Button
Pen Tool Buttons
On-Screen Display Control Buttons
Indicators
Interactive Screen
Stylus Tether
You can easily integrate the console into many varieties of desk, table or lectern-type
furniture.
The display source for the screen depends on the user’s selection on the X-Port 30 unit
control panel. When a source button is pressed, the X-Port 30 unit sends RS-232 serial data
and RGBHV video signals from one of three connected input sources to the screen.