SMART Sympodium IM-150, Руководство по установке, Страница: 11 / 63

Sympodium IM–150 Installation Guide 3
The video port is an RGBHV input port into which you insert the DVI connector of the supplied
custom DVI/RGB cable. The standard HD DB15 female end of this cable connects to the
X-Port 30 unit.
While the interactive screen supports DVI signals, only use the analog interface with the
console.
The interactive screen uses a single 18V DC power supply, which comes with the unit. Along
with the power supply, you receive an appropriate country-specific power cable to connect to
an outlet. Once you connect the power, 18V DC power flows from the pen tool selector board
inside the console to the interactive screen.
The AC or MAINS input is designed for both 120V AC and 220V AC operation. Nevertheless,
the IM-150 is an auto-switching unit; no user intervention is required.
The X-Port 30 Unit
The X-Port 30 unit controls the switching of RGB video, RS-232 serial and audio signals. The
user selects a device by pressing a source selection button on the control panel. After the
button press, all three signals are switched simultaneously.
Back View
Front View
Connection Panel
Control Panel
You can connect up to three input devices to the connection panel on the X-Port 30 unit. While
one input connection is generally a main computer, the other two can be any combination of
the following:
•
laptop computer
•
document camera
•
VCR
•
DVD player
NOTE: If the output of your video source isn’t RGB, you’ll need a video scaler.
Use the connection panel on the X-Port 30 unit to integrate the IM-150 with other room systems,
such as a projector or a room-control system. Although they are not included with the Sympodium
IM-150 integration module, the X-Port 30 unit supports many input and output devices, including:
•
power amplifier and speakers or a room audio system
•
computer (main or laptop)
•
document camera, VCR or DVD player (may also need a video scaler)
•
projector