N
N O T E S
l
The first time you enable the password settings, the default password value is four numbers,
for example, 1234.
l
If you forget the projector password, refer to
on page 55 to set
the projector setting to factory defaults.
Simple Network Management Protocol (SNMP)
Your projector support a list of SNMP commands as described in the management information base
(MIB) file. You can download this file by browsing to
and clicking the MIB
files link in the
Hardware
section for the SMART UX60 projector.
The SNMP agent in your projector supports SNMP version 1 or 2. Upload the MIB file to your SNMP
management system application, and then use it as described in your application’s user guide.
A P P E N D I X
A
Remotely managing your system through a network interface
66
