SMART PCIE-6001, Инструкция по установке и эксплуатации

Страница: 31 / 48

Hardware Preparation and Installation
PCIE-6001 Installation and Use (6806800U73B) 31
5. Close the system cover and then power on the system.
2.7.2 PCIE-6001 Card Removal
To remove the PCIE-6001 card, perform the following steps:
1. Make sure you are in an ESD-safe environment.
2. Power off the system, disconnect the system from the electrical outlet and peripherals
and remove any cables connected to the card.
3. Remove the system cover.
4. Remove the screw holding the front panel bracket and gently pull the PCIE-6001 card
from the slot.
5. Close the cover of the system.
NOTICE
Make sure that the card has enough air flow after closing the system with the cover.
Refer to
MaxCore MC3000 Platform Installation and Use manual for setting the fan
speed accordingly.
The CPU transcoding performance is directly related to the airflow and cooling
ability of the server in which the card is installed.
Wait at least 30 minutes for the card to cool down as the heat sink could be
extremely hot.
NOTICE
Place the PCIE-6001 card into an ESD-protective bag and seal it appropriately.